40 dB below fundamentalOutput power:>+5 dBm@ 50 ohmsSerial interface speeds:9600 to 19.2K baudPower requirements:12 - 16 VDC @ <250 ma or 8 AA batteries (Alkaline or NiMH)Antenna connector:Industry standard `N` connectorSize:8.5 inch x 4.3 inch x 2.25 inchWeight:20 oz.Memory:Store 15 plotsDisplay:0 to 500 MHzCommunications:Serial PortInternal Power:8 AA Alkaline, NiMH or NiCd batteries (optional)External Power:90-240 VAC, 50-60Hz wall adapter optional ' />
header
SWR Meter SWR METER AEA 140-525mhz
SWR METER AEA 140-525mhzMerk: AEAKategori: SWR Meter0,00
SWR METER ANALIZER AEA 140-525Mhz
AEA’s 140-525 Analyzer operates in the UHF/VHF band, and has a frequency range of 135 -525 MHz. The 140-525 provides graphical plots of VSWR and Return Loss, numerical results, and plot storage.

AEA Technology"s 140-525 Analyzer is a graphical antenna analyzer covering 135 to 525 MHz that speeds visualization of VSWR and Return Loss plots. The onscreen plot allows you to quickly determine the best match frequency and the 2:1 bandwidth points. 140-525 has 15 memories for plot storage and a relative Field Strength meter to determine if there is excessive RF in the testing area.
At 20 ounces, the 140-525 Analyzer is light weight and easily hand held. With the Analyst Director Software (Windows 95/98/2000/ME/XP compatible) to interface with your PC, you have endless curve storage and printout capability.
The 140-525 and its software is a powerful, yet cost effective, VHF/UHF testing tool set that should be in every Engineer/Technicians tool box.

FEATURES

Simultanious multiple plot viewing in memory mode.

SuperTwist display for better contrast and viewing angles.

Storage for 15 plots.

Signal generator mode.

Self Test and calbration functions

Return Loss and VSWR modes.

Relative Field strength measurements.

Optional Windows™ Analyst Director Software

Plot transfer between PC and 140-525.

Non-volatile memory

Compatible with NiMH and NiCd batteries.

Battery Saver auto-off and auto-hold functions

Auto Scaling.

Auditory cues.

SPECIFICATION


Range:
135 to 525 MHz

Display Resolutions:
increments of 10 KHz

Measurement speed:
Single frequency: Several sweeps per second / Normal sweep: < 2 seconds

Frequency display width:
0 to 500 MHz

Impedance Range:
50 Ohms

Harmonic and spurious:
>40 dB below fundamental

Output power:
> 5 dBm@ 50 ohms

Serial interface speeds:
9600 to 19.2K baud

Power requirements:
12 - 16 VDC @ <250 ma or 8 AA batteries (Alkaline or NiMH)

Antenna connector:
Industry standard `N` connector

Size:
8.5 inch x 4.3 inch x 2.25 inch

Weight:
20 oz.

Memory:
Store 15 plots

Display:
0 to 500 MHz

Communications:
Serial Port

Internal Power:
8 AA Alkaline, NiMH or NiCd batteries (optional)

External Power:
90-240 VAC, 50-60Hz wall adapter optional
dukungan online bgsearchbg newsletterradio komunikasi
Total Visitor 1342699~client_time~
merk
PT. Total Communication Nusantara